Classical European outlets

Classical European TV/FM outlets

The Classical range of standard European TV/FM outlets comply with standard regulations and makes an attractive alternative for traditional TV/FM installations. The 6 different versions offer a different set of attenuation specifications for TV/FM and pass.

Classical European Multimedia outlets

The range of classical multimedia outlets is carefully designed to comply with CENELEC and designers requirements concerning signal quality. The choice between a standard and a diplex data outlet makes it possible to optimize network performance according to return path attenuation. The products can be delivered with or without plastic parts.

  • Three separate frequency areas: DATA/TV/ FM
  • High isolation between outputs
  • Easy mounting and robust housing
  • Mount depth: 24 mm
  • High return loss
  • Legacy models

The models that are listed below, are the previous generation of DKT outlets. Technically they are equals of the current series, the changes are mechanical where the cabling have been optimized.

Read more

TV/FM datasheet

Media datasheet

Classical TV/FM EU outlets

List of available products

Type Number
Item Number
Description
File

Euro IM0-H

52120

Euro IEC Outlet without filter 0db

 

T0BX-C

52500

Terminated TV & Radio Outlet.
TV : 1 dB
FM : 1.3 dB

T4BX-C

52505

Loopthrough TV & Radio Outlet.
TV : 4 dB
FM : 4.5 dB
Out : 3.8

T7BX-C

52510

Loopthrough TV & Radio Outlet.
TV : 7 dB
FM : 7.5 dB
Out : 2.8 dB

T10BX-C

52515

Loopthrough TV & Radio Outlet.
TV : 10 dB
FM : 10 dB
Out : 1.8 dB

T13BX-C

52520

Loopthrough TV & Radio Outlet.
TV : 13w dB
FM : 13 dB
Out : 0.9 dB

btv-111-d-HQ-IEC

53000

5 – 2.000 MHz, 1 port IEC-male, tap loss typ. 1 x 11,5 dB, through loss typ. 1,3 dB (5 – 1.218 MHz)/2,3 dB (1.218 – 1.700 MHz/2,6 dB (1.700 – 2.000 MHz), intermodulation resistant acc. to EN 60728-4, screening Class A +10 dB, without cover plate SAD 03

btv-113-d-HQ-IEC

53001

5 – 2.000 MHz, 1 port IEC-male, tap loss typ. 1 x 13,0 dB, through loss typ. 1,3 dB (5 – 1.218 MHz)/2,3 dB (1.218 – 1.700 MHz/2,6 dB (1.700 – 2.000 MHz), intermodulation resistant acc. to EN 60728-4, screening class A +10 dB, without cover plate SAD 03

btv-115-d-HQ-IEC

53002

5 – 2.000 MHz, 1 port IEC-male, tap loss typ. 1 x 15,0 dB, through loss typ. 1,3 dB (5 – 1.218 MHz)/2,3 dB (1.218 – 1.700 MHz/2,6 dB (1.700 – 2.000 MHz), intermodulation resistant acc. to EN 60728-4, screening class A +10 dB, without cover plate SAD 03

btv-1IEC-NL

53003

1 port, double galvanic isolated, 5 – 2.000 MHz, 1 port IEC-male with grounding connector, tap loss typ. 1 x 0,5 dB, intermodulation resistant acc. to DIN EN 60728-4, screening Class A +10 dB, set incl. surface-mount frame & cover plate & 2,0 m Cu grounding cable

btv-1F-NL

53004

1 port, double galvanic isolated, 5 – 2.000 MHz, 1 port F-female with grounding connector, tap loss typ. 1 x 0,5 dB, intermodulation resistant acc. to DIN EN 60728-4, screening Class A +10 dB, set incl. surface mount frame & cover plate & 2,0 m Cu grounding cable

btv-01-UPC

53005

1 port, 5 – 2.000 MHz, 1 port IEC-male, tap loss typ. 1 x 0,2 dB, intermodulation resistant acc. to DIN EN 60728-4, screening Class A +10 dB, without cover plate SAD-03

btv-02-UPC

53006

1 port, 5 – 2.000 MHz, 1 port F-female, tap loss typ. 1 x 0,2 dB, intermodulation resistant acc. to DIN EN 60728-4, screening Class A +10 dB, without cover plate SAD-03

btv-03-UPC

53007

1 port, 5 – 2.000 MHz, 1 port F-female, tap loss typ. 1 x 0,2 dB, intermodulation resistant acc. to DIN EN 60728-4, screening Class A +10 dB, without cover plate SAD-03

btv-04-UPC

53008

2 port, 5 – 2.000 MHz, F-female/F-female, tap loss typ. 2 x 4,0 dB, intermodulation resistant acc. to DIN EN 60728-4, screening Class A +10 dB, without cover plate SAD 03

btv-05-UPC

53009

1 port, 5 – 2.000 MHz, 1 Port IEC-male, tap loss typ. 1 x 4,0 dB, through loss typ. 4,0 dB, intermodulation resistant acc. to DIN EN 60728-4, screening Class A +10 dB, without cover plate SAD-03

btv-06-UPC

53010

2 port, 5 – 2.000 MHz, IEC-male/IEC-female, tap loss typ. 2 x 8,0 dB, through loss typ. 4,0 dB, intermodulation resistant acc. to DIN EN 60728-4, screening Class A +10 dB, without cover plate SAD-03

btv-07-UPC

53011

2 port, 5 – 2.000 MHz, F-female/F-female, tap loss typ. 2 x 8,0 dB, through loss typ. 4,0 dB, intermodulation resistant acc. to DIN EN 60728-4, screening Class A +10 dB, without cover plate SAD-03

btv-MMD-204-s

53012

2 port, 5 – 1.800 MHz, selective DATA output 109 – 862 MHz, screening acc. to DIN EN 500083-2 Class A +10 dB, quick installation due to push-pin-clamp-technology, suitable for DOCSIS 3.1, without cover plate SAD-122

btv-MMD-408

53020

Terminated ; 8dB Radio + TV + 2 separate 65MHz DATA-ports (F-females) for the direct connection of an interactive Set-Top-Box respectively PVR and a cable modem • Very high isolation between TV/RF and the DATA-ports to avoid influences of TV-IF frequency by ingress of reverse signals, very high isolation between the DATA-ports in the reverse path range • Galvanic isolation protection of TV-, RF- and DATA-ports against hum modulation and leakage currents (inner conductors only) • Increased intermodulation resistance at 150 VDC/115 VAC/50 Hz surge in compliance with EN 60828-4

btv-MMD-412T

53021

Terminated ; 12dB Radio + TV + 2 separate 65MHz DATA-ports (F-females) for the direct connection of an interactive Set-Top-Box respectively PVR and a cable modem • Very high isolation between TV/RF and the DATA-ports to avoid influences of TV-IF frequency by ingress of reverse signals, very high isolation between the DATA-ports in the reverse path range • Galvanic isolation protection of TV-, RF- and DATA-ports against hum modulation and leakage currents (inner conductors only) • Increased intermodulation resistance at 150 VDC/115 VAC/50 Hz surge in compliance with EN 60828-4

btv-MMD-412-d

53022

Loopthrough ; 12dB Radio + TV + 2 separate 65MHz DATA-ports (F-females) for the direct connection of an interactive Set-Top-Box respectively PVR and a cable modem • Very high isolation between TV/RF and the DATA-ports to avoid influences of TV-IF frequency by ingress of reverse signals, very high isolation between the DATA-ports in the reverse path range • Galvanic isolation protection of TV-, RF- and DATA-ports against hum modulation and leakage currents (inner conductors only) • Increased intermodulation resistance at 150 VDC/115 VAC/50 Hz surge in compliance with EN 60828-4

btv-MMD-415-d

53023

Loopthrough ; 15dB Radio + TV + 2 separate 65MHz DATA-ports (F-females) for the direct connection of an interactive Set-Top-Box respectively PVR and a cable modem • Very high isolation between TV/RF and the DATA-ports to avoid influences of TV-IF frequency by ingress of reverse signals, very high isolation between the DATA-ports in the reverse path range • Galvanic isolation protection of TV-, RF- and DATA-ports against hum modulation and leakage currents (inner conductors only) • Increased intermodulation resistance at 150 VDC/115 VAC/50 Hz surge in compliance with EN 60828-4

btv-MMD-415-HPF

53024

65MHz HPF Loopthrough ; 15dB Radio + TV + 2 separate 65MHz DATA-ports (F-females) for the direct connection of an interactive Set-Top-Box respectively PVR and a cable modem • Very high isolation between TV/RF and the DATA-ports to avoid influences of TV-IF frequency by ingress of reverse signals, very high isolation between the DATA-ports in the reverse path range • Galvanic isolation protection of TV-, RF- and DATA-ports against hum modulation and leakage currents (inner conductors only) • Increased intermodulation resistance at 150 VDC/115 VAC/50 Hz surge in compliance with EN 60828-4

btv-MMD-417-d

53025

Loopthrough ; 17dB Radio + TV + 2 separate 65MHz DATA-ports (F-females) for the direct connection of an interactive Set-Top-Box respectively PVR and a cable modem • Very high isolation between TV/RF and the DATA-ports to avoid influences of TV-IF frequency by ingress of reverse signals, very high isolation between the DATA-ports in the reverse path range • Galvanic isolation protection of TV-, RF- and DATA-ports against hum modulation and leakage currents (inner conductors only) • Increased intermodulation resistance at 150 VDC/115 VAC/50 Hz surge in compliance with EN 60828-4

btv-MMD-420-d

53026

Loopthrough ; 20dB Radio + TV + 2 separate 65MHz DATA-ports (F-females) for the direct connection of an interactive Set-Top-Box respectively PVR and a cable modem • Very high isolation between TV/RF and the DATA-ports to avoid influences of TV-IF frequency by ingress of reverse signals, very high isolation between the DATA-ports in the reverse path range • Galvanic isolation protection of TV-, RF- and DATA-ports against hum modulation and leakage currents (inner conductors only) • Increased intermodulation resistance at 150 VDC/115 VAC/50 Hz surge in compliance with EN 60828-4

btv-MMD-12-HPF

53028

Loopthrough ; 12dB Radio + TV + Special DATA-port (F-female) for the separate connection of a cable modem ; TV- and RF-ports designed as broadband ports with equal tap loss on TV and RF • Reverse path block filter in the through way to protect the reverse path from conventional antenna outlets installed downstream • Galvanic isolation protection against hum modulation an leakage currents (only inner conductors);Very high isolation between TV and DATA-port • Screening according EN 50083-2 Class A • Cover plate SAD-155, 80 x 80 mm, white coloured RAL 9010, will be delivered together with the outlet (Order No. 22080600) • Surface-mount frame SAD-165, 80 x 80 x 33 mm, white colored RAL 9010 (Order No. xxxDKTxxx)

btv-MMD-17-HPF

53029

Loopthrough ; 17dB Radio + TV + Special DATA-port (F-female) for the separate connection of a cable modem ; TV- and RF-ports designed as broadband ports with equal tap loss on TV and RF • Reverse path block filter in the through way to protect the reverse path from conventional antenna outlets installed downstream • Galvanic isolation protection against hum modulation an leakage currents (only inner conductors);Very high isolation between TV and DATA-port • Screening according EN 50083-2 Class A • Cover plate SAD-155, 80 x 80 mm, white coloured RAL 9010, will be delivered together with the outlet (Order No. 22080600) • Surface-mount frame SAD-165, 80 x 80 x 33 mm, white colored RAL 9010 (Order No. xxxDKTxxx)

btv-306-s-HQ

53030

Terminated 6dB TV & Radio outlet (Data requires POF) ; Frequency range forward path up to 2.000 MHz, thereby ready for DOCSIS® 3.1 and MoCA 2.0 • Broadband TV- and radio-ports with 87,5 – 2.000 MHz, DATA-port with 5 – 2.000 MHz • Very good linearity, thereby high cascadeability • Screening according to EN 50083-2 Class A +10 dB, therefore LTE protected • High protection against any LTE immision • Very high intermodulation resistance of > 105 dBc according to EN 60728-4 (2 tones at 60 MHz and 65 MHz with 120 dBμV each, before and after 25 VDC surge hit) • New outlet design according to DIN 45330 with larger cable support for an optimized bending radius and outlet body with 50 mm diameter (therefore it can be used in older wall boxes as well) • Clamp technology for inner conductor with diameter 0,4 – 1,2 mm, suitable for coax cables with diameter 4,1 – 7,2 mm • Very high isolation between TV and DATA • Galvanic isolation protection at all ports • Cover plate SAD-303 not included (xxxDKTxxx)

btv-308-e-HQ

53031

Terminated 8dB TV & Radio outlet (Data requires POF) ; Frequency range forward path up to 2.000 MHz, thereby ready for DOCSIS® 3.1 and MoCA 2.0 • Broadband TV- and radio-ports with 87,5 – 2.000 MHz, DATA-port with 5 – 2.000 MHz • Very good linearity, thereby high cascadeability • Screening according to EN 50083-2 Class A +10 dB, therefore LTE protected • High protection against any LTE immision • Very high intermodulation resistance of > 105 dBc according to EN 60728-4 (2 tones at 60 MHz and 65 MHz with 120 dBμV each, before and after 25 VDC surge hit) • New outlet design according to DIN 45330 with larger cable support for an optimized bending radius and outlet body with 50 mm diameter (therefore it can be used in older wall boxes as well) • Clamp technology for inner conductor with diameter 0,4 – 1,2 mm, suitable for coax cables with diameter 4,1 – 7,2 mm • Very high isolation between TV and DATA • Galvanic isolation protection at all ports • Cover plate SAD-303 not included (xxxDKTxxx)

btv-311-d-HQ

53032

Loopthrough 11dB TV & Radio outlet (Data requires POF) ; Frequency range forward path up to 2.000 MHz, thereby ready for DOCSIS® 3.1 and MoCA 2.0 • Broadband TV- and radio-ports with 87,5 – 2.000 MHz, DATA-port with 5 – 2.000 MHz • Very good linearity, thereby high cascadeability • Screening according to EN 50083-2 Class A +10 dB, therefore LTE protected • High protection against any LTE immision • Very high intermodulation resistance of > 105 dBc according to EN 60728-4 (2 tones at 60 MHz and 65 MHz with 120 dBμV each, before and after 25 VDC surge hit) • New outlet design according to DIN 45330 with larger cable support for an optimized bending radius and outlet body with 50 mm diameter (therefore it can be used in older wall boxes as well) • Clamp technology for inner conductor with diameter 0,4 – 1,2 mm, suitable for coax cables with diameter 4,1 – 7,2 mm • Very high isolation between TV and DATA • Galvanic isolation protection at all ports • Cover plate SAD-303 not included (xxxDKTxxx)

btv-313-d-HQ

53033

Loopthrough 13dB TV & Radio outlet (Data requires POF) ; Frequency range forward path up to 2.000 MHz, thereby ready for DOCSIS® 3.1 and MoCA 2.0 • Broadband TV- and radio-ports with 87,5 – 2.000 MHz, DATA-port with 5 – 2.000 MHz • Very good linearity, thereby high cascadeability • Screening according to EN 50083-2 Class A +10 dB, therefore LTE protected • High protection against any LTE immision • Very high intermodulation resistance of > 105 dBc according to EN 60728-4 (2 tones at 60 MHz and 65 MHz with 120 dBμV each, before and after 25 VDC surge hit) • New outlet design according to DIN 45330 with larger cable support for an optimized bending radius and outlet body with 50 mm diameter (therefore it can be used in older wall boxes as well) • Clamp technology for inner conductor with diameter 0,4 – 1,2 mm, suitable for coax cables with diameter 4,1 – 7,2 mm • Very high isolation between TV and DATA • Galvanic isolation protection at all ports • Cover plate SAD-303 not included (xxxDKTxxx)

btv-315-d-HQ

53034

Loopthrough 15dB TV & Radio outlet (Data requires POF) ; Frequency range forward path up to 2.000 MHz, thereby ready for DOCSIS® 3.1 and MoCA 2.0 • Broadband TV- and radio-ports with 87,5 – 2.000 MHz, DATA-port with 5 – 2.000 MHz • Very good linearity, thereby high cascadeability • Screening according to EN 50083-2 Class A +10 dB, therefore LTE protected • High protection against any LTE immision • Very high intermodulation resistance of > 105 dBc according to EN 60728-4 (2 tones at 60 MHz and 65 MHz with 120 dBμV each, before and after 25 VDC surge hit) • New outlet design according to DIN 45330 with larger cable support for an optimized bending radius and outlet body with 50 mm diameter (therefore it can be used in older wall boxes as well) • Clamp technology for inner conductor with diameter 0,4 – 1,2 mm, suitable for coax cables with diameter 4,1 – 7,2 mm • Very high isolation between TV and DATA • Galvanic isolation protection at all ports • Cover plate SAD-303 not included (xxxDKTxxx)

btv-317-d-HQ

53035

Loopthrough 17dB TV & Radio outlet (Data requires POF) ; Frequency range forward path up to 2.000 MHz, thereby ready for DOCSIS® 3.1 and MoCA 2.0 • Broadband TV- and radio-ports with 87,5 – 2.000 MHz, DATA-port with 5 – 2.000 MHz • Very good linearity, thereby high cascadeability • Screening according to EN 50083-2 Class A +10 dB, therefore LTE protected • High protection against any LTE immision • Very high intermodulation resistance of > 105 dBc according to EN 60728-4 (2 tones at 60 MHz and 65 MHz with 120 dBμV each, before and after 25 VDC surge hit) • New outlet design according to DIN 45330 with larger cable support for an optimized bending radius and outlet body with 50 mm diameter (therefore it can be used in older wall boxes as well) • Clamp technology for inner conductor with diameter 0,4 – 1,2 mm, suitable for coax cables with diameter 4,1 – 7,2 mm • Very high isolation between TV and DATA • Galvanic isolation protection at all ports • Cover plate SAD-303 not included (xxxDKTxxx)

Accessories for antenna wall outlets

List of available products

Type Number
Item Number
Description
File

btv-DGIB-1-SET

53090

Double galvanic isolated connection box, 5 – 2.000 MHz, input: IEC-male with groud connector, tap loss typ. 1 x 0,5 dB, intermodulation resistant acc. to DIN EN 60728-4, high screening acc. to Class A +10 dB, as bundle incl. ABS isolated plastic-frame, white RAL 9010

btv-DGIB-2-SET

53091

Double galvanic isolated connection box, 5 – 2.000 MHz, input: F-female with groud connector, tap loss typ. 1 x 0,5 dB, intermodulation resistant acc. to DIN EN 60728-4, high screening acc. to Class A +10 dB, as bundle incl. ABS isolated plastic frame, white RAL 9010

SAD-03

53092

Cover plate with removable blind cap at the radio port, dimensions: 80 x 80 x 8 mm, colored white RAL 9010

SAD-122

53093

Cover plate, white, for 2 port antenna outlets btv-MMD-2xx-x

SAD-165

53094

Frame for antenna wall outlet 80 x 80 x 32 mm, for cover plate SAD-155, SAD-200, SAD-300, SAD-400, SAD-401, color white RAL 9010

Multimedia Outlets

List of available products

Type Number
Item Number
Description
 

MM4-65DX

52610

Diplex filter terminated 5-65/118-1000 MHz Data, TV, Radio Outlet.
Data : 0.8 / 4.5dB
TV : 4.5 dB
FM : 4.5 dB

 

MM4-65DX-SGI

52648

Semi galvanic isolated, diplex filter, terminated 5-65/118-1000 MHz Data, TV, Radio Outlet.
Data : 0.8 / 4.5 dB
TV : 4.5 dB
FM : 5 dB

 

MM10-65DX

52625

Diplex filter terminated 5-65/118-1000 MHz Data, TV, Radio Outlet.
Data : 0.8 / 10 dB
TV : 2 dB
FM : 2.5dB

 

MM10-65X

52620

Standard loopthrough 5-1000 MHz Data, TV, Radio Outlet.
Data : 10 dB
TV : 10 dB
FM : 10 dB
Out : 2.5 dB

 

MM13-65X

52645

Standard loopthrough 5-1000 MHz Data, TV, Radio Outlet.
Data : 13 dB
TV : 13 dB
FM : 13 dB
Out : 2 dB

 

MM16-65X

52650

Standard loopthrough 5-1000 MHz Data, TV, Radio Outlet.
Data : 16 dB
TV : 16 dB
FM : 16 dB
Out : 1.7 dB

 

MM4-65

52318

Standard terminated 5-1000 MHz Data, TV, Radio Outlet.
Data :3.5 dB
TV : 4.5 dB
FM : 5 dB

 

MM8-65SX-C

52640

Loopthrough, white multimedia Outlet.
Data: 8 dB
TV: 8 dB
FM: 9 dB
Out: 4 dB

 

Multimedia Outlets on request

List of available outlets on request

Type Number
Item Number
Description
File

MM4-65X

52605

Standard terminated 5-1000 MHz Data, TV, Radio Outlet.
Data : 3.5dB
TV : 4.5 dB
FM : 5dB

MM4-65F

52670

Diplex filter terminated

MM4-85DX-F

52682

5-85MHz/118-1300MHz TV & Data Terminated F-connectors
Data : 1.4/5.5 dB
TV : 5.5

MM4-85X-F

52683

5-1300MHz TV & Data Terminated F-connectors
Data/TV : 5.5 dB
TV : 5.5

MM4-65D

52323

Diplex terminated 5-65/118-1000 MHz Data, TV, Radio Outlet.
Data : 0.8/4.5 dB
TV : 4.5 dB
FM : 4.5 dB

Related products

Push-in-outlet (PIO)

Be well prepared for DOCSIS 3.1. With a Push-In-Outlet there are no longer problems in changing frequencies on up- and downstream.

Read more

Freja series outlets

The Freja series has been developed by DKTCOMEGA especially for the Danish market with the familiar rectangular design.

Read more

Odin series outlets

DKTCOMEGA has developed the Odin outlet especially for the Danish market. The series comes both as a TV/FM and as a multimedia outlet.

Read more

KNOWLEDGE

The coaxial outlets of the future broadband network

The outlet and home in general is one of the major issues in bringing future broadband services to the end user’s gadgets.

Read more