Galvanic isolators
Galvanic isolators block balancing currents due to local potential differences, i.e. between the distribution network and the home network. These currents might flow both inside cables and on the cable screens, so the galvanic isolators acts as high-voltage (>2kV) capacitors both inside and outside. The DKT galvanic isolators all fulfil the requirements in EN 60728-11 §11, i.e. they withstand a DC voltage of 2120 V for at least one minute.
GI T-MF 1G5
The new fully galvanic isolator from DKT. Far smaller than its predecessor, it is easy to install, and is usable both outdoor and indoor.
It can effectively separate the difference in the voltage potential between the distribution network and the subscriber installation in accordance to the guidelines in EN60728-11, Safety.
Gi-1 (88006)
A one output port galvanic isolator. This can be placed between the distribution network and an existing home network.
DVU 1-4 GI (41140 + DVU 1-4GI 65 41141)
has two output ports, and serves as a home network interface that splits the signal into a TV only branch without return path, and a DATA branch supporting either the DOCSIS 3.1 frequency bands, i.e. downstream 258-1218MHz and upstream 5-204MHz, or the DOCSIS 3.0 frequency bands (5-65MHz/87-1218MHz).
Galvanic isolators
Download the datasheets here
DKT Gi 2-10R-MB
88010
Galvanic isolator, 5-1000 MHz, 2 output
DATA -10dB/-0.4dB, TV/FM -2dB
With mounting brackets
DVU 1-4 GI LTE
41144
DATA: 5 – 204 MHz / 258 – 1300 MHz = 0.5 / 4 dB
TV: 258 – 790 MHz = 4 dB
Accessories
List of available product
Cover for DVU 1-4 GI (LTE)
52847
The cover is used to make the installed DVU 1-4 GI or DVU 1-4 GI LTE appear neutral
